Click for more products.
No produts were found.

Maxx Aluminium Hop-Up Chamber ME-SPORT

Maxx

€59.95 (tax incl.)
Reference:
CB-Maxx-33980
Love1
Add to compare0
Add to wishlist
Description

CNC Aluminum Hopup Chamber ME Sport (with BB Catching System) unit is precisely made to improve accuracy and ensure consistent air seal for Tokyo Marui (include KRYTAC and KWA) M4/M16 Standard AEG series.
The Hopup Chamber ME unit has a precision rotary dial design for fine hopup adjustments, also re-engineered the hopup levers and concave nubs to work best with R-hop and Standard-Hop to keep the BBs shooting straight and accurate on every single shot.
The Hopup Chamber ME unit is designed to accept the nozzle length from 21.00mm to 21.25mm, and fully compatible with most aftermarket soft and hard rubber bucking without losing FPS or dropping BBs.
The Hopup Chamber ME Housing is equipped with a new CNC Delrin Locking C-Clip design to hold barrel tight without wobbling and twisting, and 3 compression springs on top, at bottom and in center of housing to ensure the hopup unit is exactly centered, straight and air tight at all times when adapted to any V2 gear boxes with 11mm or 11.5mm inner bore.
More than that, the Hopup Chamber ME Sport unit is specially designed with BB Catching System to prevent dropping BBs after removing the magazine.

***The Dual UV LED Boards and Module set and Single UV LED Board w/ Clear Cover and Module set are optional add-ons to glow BBs in the dark. Operating Voltage from 7VDC - 15VDC (2-4 cells LiPo, 6-13 cells NiCad). (Sold separately)
***The Empty Magazine Detection Sensor and Electronic Switch Controller are optional add-ons to stop Motor/HPA firing when the magazine is empty. (Sold separately)
***Test results: FPS might be increased from 10FPS to 30FPS over stock setup. Please check your FPS!

 

  Includes
product_right_arrow.png 1 x CNC Aluminum Hopup Chamber ME Sport (with BB Catching System) unit
product_right_arrow.png 2 x Strong Clear Vinyl Cover set
product_right_arrow.png 1 x CNC Aluminum Standard-Hop Arm
product_right_arrow.png 1 x CNC Aluminum R-Hop Arm
product_right_arrow.png 1 x Silicone Rubber Standard-Hop Nub Damper
product_right_arrow.png 1 x Silicone Rubber R-Hop Nub Damper
product_right_arrow.png 1 x CNC Aluminum 4.5mm length Precision R-Hop Concave Nub
product_right_arrow.png 1 x CNC Aluminum 6mm length Precision R-Hop Concave Nub
product_right_arrow.png 1 x CNC Brass Threaded Slot Pin
product_right_arrow.png 1 x CNC Delrin Locking C-Clip
product_right_arrow.png 1 x CNC Barrel Brass Spacer
product_right_arrow.png 1 x Brass Spacer Holder Oring
product_right_arrow.png 3 x Steel Compression Spring

 

  Specification

product_right_arrow.png Overall Length: 51mm
product_right_arrow.png Overall Height: 37.75mm
product_right_arrow.png Hub Outer Diameter (to fit into Gear Box): min 11mm - max 11.5mm
product_right_arrow.png Hub Outer Diameter (to fit into Outer Barrel): min 12mm
product_right_arrow.png Hub Inner Diameter (to fit Nozzle): max 8.3mm
product_right_arrow.png Feeder Outer Diameter (to fit magazine): min 9.25mm
product_right_arrow.png Feeder Length (to fit magazine): max 6.25mm
product_right_arrow.png Material: Aluminum 6061

 

  Features
product_right_arrow.png Machined from a solid aircraft aluminum block with tight tolerances to provide better accuracy, consistency, and durability
product_right_arrow.png Improved accuracy and ensure consistent air seal for Tokyo Marui (include KRYTAC and KWA) M4/M16 Standard AEG series
product_right_arrow.png Precision rotary dial design for fine hopup adjustments
product_right_arrow.png Re-engineered the hopup levers and concave nubs to work best with R-hop and Standard-Hop to keep the BBs shooting straight and accurate on every single shot
product_right_arrow.png Removable Brass Threaded Slot Pin for setup and maintenance
product_right_arrow.png Accepted the nozzle length from 21.00mm to 21.25mm
product_right_arrow.png Fully compatible with most aftermarket soft and hard rubber bucking without losing FPS or dropping BBs
product_right_arrow.png Equipped with a new CNC Delrin Locking C-Clip design to hold barrel tight without wobbling and twisting
product_right_arrow.png Equipped with 3 compression springs on top, at bottom and in center of housing to ensure the hopup unit is exactly centered, straight and air tight
product_right_arrow.png Compatible with any V2 gear boxes with 11mm or 11.5mm bore
product_right_arrow.png Specially designed with BB Catching System to prevent dropping BBs after removing the magazine
product_right_arrow.png The Dual UV LED Boards and Module set and Single UV LED Board w/ Clear Cover and Module set to glow BBs in the dark ready!
product_right_arrow.png The Empty Magazine Detection Sensor to stop Motor/HPA firing ready!

 

  Weight
product_right_arrow.png N/A grams

 

  Usage
product_right_arrow.png Compatible with most Tokyo Marui (include KRYTAC and KWA) M4/M16 standard AEG version 2 gear box

 

  Requires
product_right_arrow.png Wearing eye protection is recommended
product_right_arrow.png Use proper tools for disassembly and reassembly the gear box with great care due to spring tension
product_right_arrow.png Bearing lubricant oil/grease is recommended for smooth operation

 

  Instruction
product_right_arrow.png Instruction Manuals are included
Product Details
CB-Maxx-33980
Reviews
No comments

Leave a review

  • Kwaliteit:
  • Tevredenheid:
Describe this product using simple and short words.
Out-of-Stock
Notify me when available
Brand:
Related products

Menu

Settings

Share

Create a free account to save loved items.

Sign in

Create a free account to use wishlists.

Sign in